Home /26K4 S D-220 ORD2
| Input | I/P-A: 220VDC±10%, I/P-B: 220VDC±10% |
| Current | 60A max. |
| Leakage current (mA) | 200mA max. |
| Isolation | Input-Output: Positive side, Input-Case: 2000VAC, Output-Case: 500VAC |
| Output | 220VDC±10%, Current: 60A (13200W) Max Redundant mode |
| Forward voltage drop | 800mV max on 40 Amp load |
| Load Regulation (mV) | 800mV max - Exclusive Oring diode Drop |
| Alarm | PFC Contact for I/P-A, I/P-B Fail, C, N0 close for I/P ok, C, No Open for I/P not ok |
| Response-up time (Ns) | 50ns |
| Indications | Red LED-Input A, B & Green for output |
| Input reverse polarity | Protected |
| Efficiency | 95% |
| Conducted noise | Depend on input |
| Vibration | 10 - 55Hz, 19.6m/s² (2G) |
| Safety standards | Design conforms to UL60950-1 |
| Mounting | Din Rail Mounting hole (See page-2) |
| Width | 90mm |
| Depth | 117mm (without Brass Terminal) |
| Height | 155mm |
| Weight (unpacked) | 3.0Kg Approx. |
| Connectors | Input and Output: M-6 Brass nut bolt, PFC: Screw Terminal |
Ordering Information:
26K4 S D 220 ORD2
