Home /8K6 S D-48 ORD2
| Input | I/P-A: 48VDC±10%, I/P-B: 48VDC±10% |
| Current | 60A max. (per input) |
| Leakage current | 200mA max. |
| Isolation | Input-Output: Positive side, Input-Case: 2000VAC, Output-Case: 500VAC |
| Output Voltage | 48VDC±10% |
| Output Current | 60A (2880W) Max in Redundant mode. |
| Forward voltage drop | 1000mV max on 60 Amp load |
| Load Regulation | 800mV max - Exclusive Oring diode Drop |
| Alarm | PFC Contact for I/P-A, I/P-B Fail (C, NO close for I/P ok, C, NO Open for I/P not ok) |
| Response-up time | 50ns |
| Indications | Red LED-Input A, B & green for output |
| Input reverse polarity | Protected |
| Efficiency | 95% |
| Conducted noise | Depends on input. |
| Vibration | 10 - 55Hz, 19.6m/s2 (2G) |
| Safety standards | Design conforms to UL60950-1 |
| Operating Temperature | -20°C to +85°C |
| Storage Temperature | -40°C to +100°C |
| Relative Humidity | 20-90% RH (Non-Condensing) |
| Vibration | 19.6 m/S2 10-55 Hz, 3 minutes period, 60 minutes each along X, Y & Z axis |
| Altitude | 3000m (10,000 feet) max |
| Mounting | Din Rail Mounting hole (See page-2) |
| Width | 90mm |
| Depth | 117mm (without Brass Terminal) |
| Height | 155mm |
| Weight (unpacked) | 3.0Kg Approx. |
| Connector | Input and Output: M-8 Brass nut bolt |
| PFC | Screw Terminal |
Ordering Information:
8K6 S D-48 ORD2
