Home / IN-D-2K0-DD-S-J
| Safety | UL60950-1, C-UL, EN60950-1 |
|---|---|
| Vibration | 10-55Hz, 49.0m/s² (5G), 3-minute period, 60 minutes each along X, Y, and Z axis |
| Impact | 196.1m/s² (20G), 11ms, once each along X, Y, and Z axis |
| Input and Output | UK-16 screw terminal |
|---|---|
| PFC | TB-54 screw terminal |
| PFC Contact | Provided C, No normally close and open for fault |
| Mounting | DIN Rail mounting |
|---|---|
| Dimensions | Height: 180mm Width: 135mm Depth: 115mm (without DIN clamp) |
| Weight | 3.5 Kg Approx. |
| Input |
Voltage: 48VDC (36 to 76VDC) Current: 70A max Isolation: - Input-Output: 500VDC, 30MΩ - Input-Case: 500VDC, 30MΩ - Output-Case: 500VDC, 30MΩ |
|---|---|
| Output |
Voltage: 48VDC Current: 40A Power: 1920W Ripple (mVp-p): 500 max Noise (mVp-p): 500 max Line Regulation: 1.00% max Load Regulation: 1.0% max (Exclusive Or-ing diode drop 600mV) Over-voltage / Over-current / Short-circuit / Over-temperature: Protected LED Indications: I/P, Fault red & output green OR-ing Diode: Provided for Output Redundancy Efficiency: 85% (Exclusive OR-ing diode drop) |
| Voltage | 48VDC (36V–76V) |
|---|---|
| Current | 65A at Nominal Input 48VDC |
| Isolation |
Input-Case: 500VDC, 30MΩ Input-Output: 500VDC, 30MΩ Output-Case: 500VDC, 30MΩ |
| I/P Protection | Input reverse polarity and over-current by input fuse |
| Inrush Current | <75A typical |
| Switch On Delay | <100mSec |
| Model | IN-D-2K0-DD-S-J |
|---|---|
| Power Output | 1920W DC / DC SINGLE OUTPUT |
| Operating Temperature | -20°C to 85°C |
|---|---|
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 20-95% RH (Non-Condensing) |
| Cooling | Inbuilt fan for force Air Cooling (air flow direction from bottom to top) |
