Home / IN-D-240-DC-S-G
| Input Voltage | 24VDC (18V-36V) |
| Input Current | 16.5A at nominal input (24VDC) |
| Isolation | Input-Case: 500VDC, 30MΩ Input-Output: 500VDC, 30MΩ Output-Case: 500VDC, 30MΩ |
| Input Protection | Reverse polarity and over-current protection by input fuse |
| Inrush Current | <15A typical |
| Switch-on Delay | <100ms |
| Output Voltage | 24VDC (±1%) |
| Output Current | 10.0A |
| Output Power | 240W |
| Ripple (mVp-p) | 150 max. (20MHz bandwidth) |
| Ripple Noise (mVp-p) | 120 max. |
| Line Regulation | ≤1% of Vnom |
| Load Regulation | ≤1% of Vnom (Exclusive OR-ing Drop max 0.5VDC) |
| LED Indications | DC Input (Green), DC OK (Green), DC Low/Fault (Red) |
| Output Voltage Adjustment | 22VDC to 26VDC |
| Output Protection | Overload, short-circuit protection with auto-recovery |
| Relay Contact | Provided. C, Normally Short for OK, Open for Fault |
| Derating | >85°C |
| OR-ing Diode | Inbuilt for output redundancy and parallel operation |
| Efficiency | >87% between 10% to 100% load |
| Operating Temperature | -20°C to +60°C (Derating >75°C) |
| Storage Temperature | -40°C to +100°C |
| Relative Humidity | 20-90% RH (Non-condensing) |
| Cooling | Natural Convection Cooling |
| Vibration | 10-55Hz, 19.8m/s² (2G) |
| Safety Standards | UL60950-1, Conformance |
| Switching Frequency | 370KHz |
| Mounting | Back plane / DIN-Rail |
| Enclosure | Cabinet IP42 |
| Depth | 144mm |
| Width | 70mm |
| Height | 130mm |
| Weight | <1.2Kg approx. |
| Connectors | Screw Terminals |
Ordering Information:
IN D 240 DC S G
