Home /IN-D-480-DD-S-J 10A
| Voltage | 48VDC (36V–76V) |
|---|---|
| Current | 16.5A at Nominal Input 48VDC |
| Isolation |
Input-Case: 500VDC, 30MΩ Input-Output: 500VDC, 30MΩ Output-Case: 500VDC, 30MΩ |
| I/P Protection | Input reverse polarity and over-current by input fuse |
| Inrush Current | <15A typical |
| Switch On Delay | <100mSec |
| Operating Temperature | -20°C to +60°C (Derating > 75°C) |
|---|---|
| Storage Temperature | -40°C to +100°C |
| Relative Humidity | 20–90% RH (Non-Condensing) |
| Cooling | Convection Cooling |
| Voltage | 48VDC (Tolerance ±1%) |
|---|---|
| Current | 10.0A |
| Power | 480W |
| Ripple (mVp-p) | 240 max. (20 MHz bandwidth) |
| Ripple Noise (mVp-p) | 300 max. |
| Line Regulation | ≤1% of Vnom. |
| Load Regulation | ≤1% of Vnom. (Exclusive OR-ing drop max 0.5VDC) |
| LED Indications | DC I/P (Green), DC OK (Green), DC Low/Fault (Red) |
| O/P Voltage Adjustment | 22 to 26VDC |
| O/P Protection | Over-load, short-circuit protection with O/P power limitation, auto recovery after fault |
| Relay Contact | Provided. C, No-contact short for OK, Open for not OK |
| Derating | >85°C |
| OR-ing Diode | Inbuilt for output redundancy and parallel operation. Voltage should match up to 2nd decimal |
| Efficiency | >87% between 10% to 100% load (excluding reverse polarity & OR-ing diode dissipation) |
| Vibration | 10 - 55Hz, 19.8m/s² (2G) |
|---|---|
| Safety Standards | UL60950-1, Conformance |
| Switching Frequency | 370KHz |
| Mounting | Back plane / DIN-Rail |
|---|---|
| Enclosure | Cabinet IP42 |
| Depth | 107mm |
| Width | 90mm |
| Height | 155mm |
| Weight (unpacked) | <1.5Kg Approx. |
| Connectors | Screw Terminals |
We don’t just power equipment—we empower missions. When you choose Powertec, you choose a partner who guards your operations like our own.
Noida | Bengaluru | Mumbai | Chennai | Hyderabad
