IN-R-20K-DF-S-E

Home /IN-R-20K-DF-S-E

Model:IN-R-20K-DF-S-E

FEATURES
  • 220VDC Input / 110VDC 20KW Output.
  • Input transients & surge protected.
  • Rugged AC / DC Converter for Industrial & Control Panel Application.
  • Over-voltage / Short-circuit / Over-current / Over-temp. protected.
IN-R-20K-DF-S-E
SPECIFICATIONS
Input
Voltage 220VDC ± 10%.
Current 120A max. at 220VDC Input
Isolation Input-GND : 2KV cut off current 40mA.
Input-Output : 2KV cut off current 40mA.
Output-GND : 500V cut off current 100mA.
Transient and surge Protected.
PSU ON / OFF Provided through MCB.
Environmental
Operating Temperature -20°C to +70°C
Storage Temperature -20°C to +75°C
Relative Humidity 20-90% RH (Non-Condensing)
Cooling Internal forced cooling from front to rear site.
Output
Factory Set Voltage 110VDC.
Current 182A
Power 20KW.
Output voltage tolerance 110VDC ± 1V.
Ripple (mVp-p) at O/P connector <=1% of Vnom at 20Mhz bandwidth with 1uf ceramic cap at RF probe.
Line Regulation <=1% of Vnom at output connector.
Load Regulation <=1% of Vnom at output connector.
LED Indications Input Red & Output Green.
Over-Voltage Protection Protection operative above 120-140VDC of independent output.
O/P protection Over-load, Short-circuit, Over-Voltage, Over-temp protected.
Efficiency >88% at full load with 230VAC input.
STANDARDS (Conformance)
Vibration 10 - 55Hz, 19.6m/s² (2G)
Impact 196.1m/s² (20G), 11ms, Once each X, Y, & Z.
Agency Approvals UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN.
Conducted Noise Complies with FCC-A, VCCI-A, CISPR22-A, EN55011, EN55022,,50081
Harmonic Attenuator Complies with IEC61000-3-2 class A.
Mechanical
Mounting Movable Rack with caster (front and rear door)
Depth 650mm
Width 600mm
Height 1743mm (36U) without caster
Weight (unpacked) 100Kg Apx
Connector
Input Cu Buss Bar termination
Output Cu Buss Bar termination
PDUKE New Products Synqor Products Cosel Products