PTC 4 AFDC Q C EEHH A BEC
Home /PTC 4 AFDC Q C EEHH A BEC
- B-112, Block B, Phase-2, Noida, Uttar Pradesh-201305
- Phone No. : 0120-4693000
- Email. : sales@powertecsupplies.com
Home /PTC 4 AFDC Q C EEHH A BEC
| Voltage | 230VAC ± 10%(47-63Hz) / 24VDC (18-32VDC) Priority AC Input when both source available C/O Timing between DC to AC ≤30mSec |
| Current | 2.5A with-AC/ 26A with DC-Max |
| Isolation | Input-Output : 500VDC, 10MΩ Input-Case : 500VDC, 10MΩ Output-Case : 500VDC, 10MΩ |
| Protection | DC reverse polarity, AC auto polarity Over current with fuse. |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 30-95% RH (non-condensing) |
| Cooling | Natural air Cooled. |
| O/P-1 | O/P-2 | O/P-3 | O/P-4 | |
|---|---|---|---|---|
| Voltage | 16.8V | 16.8V | 28V | 28V |
| Current | 6.2A | 6.2A | 3.6A | 3.6A |
| Power | 104W | 104W | 100W | 100W |
| Output Ripple (1%) at 20Mhz band width & 1uf ceramic at RF probe. | 150mV | 150mV | 280mV | 280mV |
| Line Regulation (±1%) | 150mV | 150mV | 280mV | 280mV |
| Load Regulation (±1%) on connector Pin | 150mV | 150mV | 280mV | 280mV |
| Protection | Over voltage, over current Short-circuit recovery after fault removal |
|||
| Over temperature | Protected | |||
| LED Indications | Input power on LED provided. | |||
| Outputs Isolation | All outputs are floating. | |||
| Efficiency | ≥85% with DC input & ≥80% with AC input | |||
| Altitude | >3000m (10,000feet max) | |||
| Factory Set output VDC | ±0.1% of nominal | |||
| MTBF | ≥5000Hrs | |||
| Mounting | Chassis Mounting |
| Connectors | Input- D3899920WE6SN & Output- D3899920WG11SN |
| Width | 172mm (with mounting plate) |
| Depth | 260mm |
| Height | 100mm |
| Weight (unpacked) | 4.7 Kg Apx. |
| EMI & EMC | As per MIL-STD-461E CE101, CE102 |
| Vibration | 20-2000 Hz, 0.02 g2/Hz, Random 5-33 Hz, ±0.125mm constant Displacement, All axes |
| Shock | 50 g, Half sine, 11 mS, Z axis 22 g, Half sine, 11 mS, X & Y axis |
| Bump | 4000 bumps, 25g, 16msec |
| High Temp | 55 ± 3°C , On condition, 70 ± 3°C , off condition |
| Low Temp | -10 ± 3°C, On condition |
| Salt Corrosion | Salt spray period of 2 hours under the Lab atmospheric conditions & and storage of equipment at a temperature of 35°C ± 2°C and a relative humidity of 90 to 95%, for 22 hours. No. of cycles -3 |
| Mould Growth | 29º C, 90% RH in mould growth chamber for 28 days |
| Drip test | 1Mtr height between Water droplets verticaly Nozzle & Equipment. water label of droplet to be maintain 300mm. REF MIL STD 810 G, Method 506.5, Procedure III |
